This is going to be a long read brother but my best advice for you. Depending on mileage and current condition of your car I would probably start by going over all the regular wear items suspension wise und upgrading those to suit your needs for daily/track use. After that I would go over the brakes. Those are going to help improve time/lap consistency, heat management for brakes, and driver confidence as you get familiar with the way your car handles on a track. Starting with bolt on power adders can often lead to brake fade and slower cornering speed. While extra horsepower sounds appealing, a stock car driven hard on a road course will quickly reveal that its factory stopping power and standard suspension are the weak links. Track driving puts immense thermal stress on a vehicle, and adding power before upgrading the chassis drastically accelerates component failure. Stock brake pads and fluid are designed for street use and will boil or glaze after a few hot laps. Upgrading to track oriented pads/fluid and upgrading brake lines will help keep braking power consistent. More power puts extra strain on factory axles, transmissions, and differentials. Upgrading the suspension helps transfer weight smoothly, reducing violent shock loads on your drivetrain. A car's track speed is ultimately limited by the size and quality of its tire contact patches, which suspension components are designed to optimize. Upgraded coilovers, stiffer sway bars, and adjustable camber plates keep the tires flat against the road/tarmac during hard cornering. Stiffer track suspension minimizes body roll, pitch, and dive. This stabilization keeps the car's weight distributed more evenly across all four tires. Replacing soft, rubber factory bushings with polyurethane or spherical bearings eliminates deflection, giving you immediate steering response. Tires and wheels also make a huge impact. Once all those things are addressed then I would do supporting mods like cooling mods. Upgraded radiator and adding an oil cooler. Then after those things are taken care you can get into the fun stuff and performance mods come into play. Depending on how much money you have to play with at this point would dictate the order in which I made those upgrades. Being budget conscious I’d start with exhaust and then intake. Adding a cat back first and then just collecting parts that will require a retune so I can do them at once and tune once vs adding a part here and there and tuning multiple times. If you made it this far I hope this advice can be of some help. Do some research of your own and you’ll find an approach that will suit your needs best!

I remember when I was first getting started working on my car and I was crunching numbers, i noted how expensive the build would take. In comes my friend who had a broken down 330i telling me he had parts for me and I could take what I needed. This man casually gave me a k&n cold air intake, rear trunk handle, shadowline trim, brand new BMW emblems, and so much more. I appreciate what he's given me, he's a great man, and whenever I work on my car, I always remember what he's given me. without him, I wouldn't have gotten this far with my project!